|
Included:
 40 pin
Straight header strip, .100", Qty (4)
 40 pin
Right Angle header strip, .100", Qty (2)
Data Sheet:
502.pdf
Print this data sheet at 1:1 scale to check IC's, pads.
|
Features:
- 160 SMT patterns
front/back, on 70 Snap-ApartTM elements, plus 12 chip modules
- 5" x 7.6" grooved pcb, .031" thick for
easy modification and placement
Patterns:
SOT23 SC75A SC90 SOT323 SC70 SC353
SC88A SOT363 SC88 SOT89 SC62 TO243 SOT223 SC73 TO261 CAP A,B,C,D TO236
SOT143 TO253 SOT25 SC74A SOT26 SC74 MSOP8 DPAK TO252 MSOP10 D2PAK
TO263 TSOP8 TSOP6 SO8 D3PAK TO268 SO14 SO16, Also accommodates many manufacturer-specific packages not listed here.
Modules include:
- Two
patterns for RS-232 to TTL that fit MAX232A and five .1uF 0805 caps
- Two SO14 quad op-amp patterns;
spots for SMT input and feedback components on all four op-amps
- Two patterns for 78XX linear regulators,
and capacitors
- Two patterns
for 79XX linear regulators, and capacitors
- Two patterns for LM317
linear regulators, and capacitors, resistors
- Two patterns for LM337 linear regulators,
and capacitors, resistors
- Note: Snap-ApartTM elements may be easily trimmed by a sharp pair
of cutters, so it is possible to make SMT inductor mounts out of
D3PAK patterns by cutting them in half, and so
forth.
|
